WET 150 KIT ( Soil Moisture, Ec & Soil Temp)
- Automatic Weather Station (GP2)
- Equitensiometer (EQ3)
- Data Loggers (GP2, GP1, DL6)
- Net Radiometer (NR2)
- Plant Canopy Analyser (Sunscan)
- Porometer (AP4)
- Image Analysis System with Convyer Belt
- Radiation Sensors (BF5, SPN1, ES2)
- Single Point Soil Moisture (THETA PROBE)
- Soil Moisture Meter (Profile Probe)
- Sunshine Pyranometer (SPN1)
- Compact Weather Station-GMX501
- WET Sensor ( Water content, Ec & Temp.)
- Soil Moisture Kit (SM150)
- SM150T Soil Moisture & Temperature Sensor
- PR2 Profile Probe with SDI 12 Interface
- WET 150 KIT ( Soil Moisture, Ec & Soil Temp)
- Soil Moisture Sensor with Data Logger
- Automatic Soil Respiration System (ACE)
- Anthocyanin Content Meter (CCM 200A plus)
- Chlorophyll Content Meter (CCM 200 plus)
- Chlorophyll Fluroscence System (OS5P+)
- Chlorophyll Meter (CCM-300)
- CO2 Monitor/Controller (Lamda-T)
- Chlorophyll Fluorometer (OS1P)
- Handheld Chlorophyll Fluorometer OS30P+
- YII METER
- Portable Leaf Area Meter (AM400)
- Portable Photosynthesis System
- FV FM METER
- Multi-Pigment-Meter (MPM-100)
- EGA60 Multi-SOIL RESPIRATION SYSTEM
- Fluorometer and Gas Exchange System
- Plant Stress Kit
- PSP32 Monitoring Fluorimeter System
- SRS-SD1000 Portable Soil Respiration
WET 150 KIT ( Soil Moisture, Ec & Soil Temp)
WET150 Kit is a portable and rugged solution for researchers who need to assess moisture and salinity conditions in soils and substrates.
The Kit makes fast soil/substrate measurements of three crucial variables that influence plant growth: moisture content, temperature*, and electrical conductivity (EC) – a strong indicator of the general nutrient level.
The WET150 Meter is a lightweight and easy to use readout-only device (no data recording or other complications). Operation of the kit is straightforward – the user inserts the WET150 into the soil or substrate and presses the “Read” button on the meter to take and display the measurement.
The WET150 Sensor comes complete with calibrations for mineral and organic soils plus perlite, coir, peat, and mineral wool substrates soils.
SPECIFICATIONS- WET150 Sensor
|
VOLUMETRIC WATER CONTENT |
ECb BULK CONDUCTIVITY |
TEMPERATURE |
|
|
ACCURACY |
± 0.03 m3.m-3 (3%) |
± (6% + 10mS.m-1) |
± 1.0°C |
|
RANGE |
Full range: 0 to 1.0 m3.m-3 |
Full range: 0 to 2000 mS.m-1 |
Full range: - 20°C to + 60°C |
|
Accurate range: 0.05 to 1.0 m3.m-3 ECb 0 to 500 mS.m-1 |
Accurate range: 0 to 1200 mS.m-1 |
Accurate range: - 20°C to + 50°C |
|
|
OUTPUT |
SDI-12 protocol 1.3 (www.sdi-12.org) Providing water content, pore water conductivity, and temperature - together with base readings of permittivity and bulk conductivity.Outputs are exceptionally configurable. |
||
|
POWER REQUIREMENT |
Operating voltage: 6 to 20 Volts Current consumption (typical values when powered from 12 Volts): Active sensing: 22 mA average over 12 ms (average includes short peaks at 45 mA) Active results computation: 2 mA over 188 ms Idle: <0.5mA |
||
|
ENVIRONMENTAL |
IP68, - 20 to + 60°C |
||
|
SAMPLE VOLUME |
~55 x 70 mm diameter |
||
|
Sample volume is weighted towards soil immediately surrounding the rods |
|||
|
DIMENSIONS |
Overall: 143 x 40 mm dia Rods: 51 mm x 2.5 mm dia |
||
|
WEIGHT |
Weight: 77g |
||
|
SENSOR CALIBRATIONS |
Individual sensors are interchangeable. Recalibration advised every 5 years (depending on use) |
||
|
SOIL CALIBRATIONS |
The WET150 Sensor comes complete with calibrations for mineral and organic soils plus perlite, coir, peat, and mineral wool substrates |
||
WET150 Meter
|
INPUT CONNECTIONS |
1 WET150 multi-parameter water content sensor |
|
CONFIGURATION |
By keypad |
|
SENSOR EXCITATION |
Via SDI-12 |
|
POWER |
2 x AA alkaline batteries |
|
BATTERY LIFE |
> 2400 readings |
|
ENCLOSURE RATING |
IP65 |
|
TEMPERATURE RANGE |
0 to +40°C |
|
DISPLAY |
2 line x 16 character |
|
SIZE |
130 x 66 x 25 (mm) |
Contact Details
Inderprastha Colony Sector- 30-33,
Faridabad (Haryana) India -121003
